SHURflo 9300 Pump Repair Service
The SHURflo 9300 is a positive displacement diaphragm type pump with very high efficiency that can be operated on 12 or 24 VDC battery bank, or with the use of one of the SHURflo pump controllers directly with a PV array. The pump can lift 1.3 gallons per minute at 230 feet of total dynamic head and can pump nearly 2 gallons per minute from shallow wells.
Maintenance and Warranty
The 9300 carries a 1-year warranty and the manufacturer recommends that the pump be pulled out of the well at least every 2 years to inspect, and if needed, replace the brushes, diaphragm, and valves. Occasionally, the cable plug, which is the connection between the cable and the pump, may also need to be replaced due to corrosion or abrasion.
Pump Repair Service
Sunshine Works will inspect and repair your SHURflo 9300 pump for a minimum charge of $100 plus the cost of repair parts listed below.
Parts prices are subject to change without notice.
After inspection we will notify you about what needs replacement, any additional time required to make the repair and time to complete. Return shipping and handling via UPS Ground is $20 to the continental USA.
Common Maintenance & Repair Parts
Prices are subject to change without notice.
End Bell Brush Kit $31
Trade in your old 9300 for a new one, get a $50 credit. No cracked canisters.
Helpful SHURflo 9300 Downloads
A partial list of the brands we sell. If
you need help please inquire,
we have it.